Single Reduced Cold-Rolled Tinplate Coil-Chunkang Metal Products Co., Ltd.

Tinplated Steel



Current location: HOME > PRODUCTS > Tinplated Steel > Single Reduced Cold-Rolled Tinplate Coil

Single Reduced Cold-Rolled Tinplate Coil

Product Description:

Grade: T1, T2, T3, T4, T5, T6 The substrate is formed by hot rolling and annealing after one-time cold rolling, usually with a thickness of 0.17-0.5mm, which is called Single Reduce, or SR for short.

Consulting Products:

8613370967988

cncksteel@chunkang.ltd

Parameter

Chemical Composition

Mechanical Properties

Product Name	Single Reduced Cold-Rolled Tinplate
Thickness	0.18mm-0.50mm
Width	260mm-980mm
Length	Support Customization
Tin Coating	General: 2.8g or 5.6g, Can be produced according to your needs
Substrate Type	MR / SPCC / L / D
Reference Standard	GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203

No.	C	Si	Mn	S	P	Cu	Ni	Cr	Mo
D	0.12	0.03	0.6	0.05	0.02	0.2	0.15	0.1	0.05
L	0.13	0.03	0.6	0.05	0.15	0.03	0.04	0.06	0.05
MR	0.13	0.03	0.6	0.05	0.2	0.2	0.2	0.1	0.05

Standard Name	Nominal Hardness HR30TS	Strong Yield MPA	Scope of Application
T-1	49	230 /-50	Drawing requirements, drawn ironing cans, nozzles, nozzles, closures
T-2	53	245 /-50	Ring and plug, dome, closure, shallow pull and special tank parts
T-2.5	55	260 /-50	Battery cell, small can cover and body
T-3	57	275 /-50	Cans and cans, large diameter caps, crown caps
T-3.5	59	290 /-50	Can body, closure and crown lid
T-4	61	340 /-50	Can body, closure and crown lid
T-5	65	480 /-50	Cans and cans